CATEGORY

Quality and safety are reliable, please feel free to buy

  • Milky White Inkjet Film

    Milky White Inkjet Film

  • Transparent Inkjet Film

    Transparent Inkjet Film

  • Matte Inkjet Film

    Matte Inkjet Film

  • Heat Transfer Film

    Heat Transfer Film

  • X-ray Medical Blue Film

    X-ray Medical Blue Film

  • Medical White Film

    Medical White Film

  • LED X-ray Film viewer

    LED X-ray Film viewer

  • Phote Paper Series

    Phote Paper Series

  • Advertising Backlit Film

    Advertising Backlit Film

  • Silk Screen Printing Frame&Handle

    Silk Screen Printing Frame&Handle

המוצרים הנבחרים המובילים
להציג יותר
Silkscreen FilmSilkscreen Film
Medical FilmMedical Film
Heat Transfer FilmHeat Transfer Film
Photo PaperPhoto Paper
Advertising MaterialsAdvertising Materials

    TOP-RANKING PRODUCTS

    Quality and safety are reliable, please feel free to buy

    HOT SELLINGS

    Quality and safety are reliable, please feel free to buy

    Tutorial GuideHeat transfer Film
    Step 1: Installation 1.Install EPSONL1800 printer driver 2.Before installation, you need to connect the printer and computer with USB 3.RIP software installation and setup: Printer selection: Stylus Photo 1390/1400 4.Ink Channel selection: YKWWMC 5.White Layer Generation selection: Spot Color Step 2: Print 1.Be careful when you put the film in printer, the matte side of the film is the print side. (please protect the print side) 2.Import the picture in the software, adjust the size and location of the picture as needed. (Image in PNG format) 3.Set the canvas size, according to the size of the print. (In units cm; The bottom of the canvas needs to reserve 3-4 cm) 4.Click Mirror 5.Check Print Color First, COLOR WHITE, Click Print Step 3: Cover hot melt powder 1.After printing, try to keep the printing sheet flat when taking it out. And need to cover the printing side with hot melt powder as soon as possible. (Pour the right amount of hot melt powder into the tray, take the printing sheet from hot melt powder is inserted at the bottom; The surface of the printing sheet should be uniform and sticky hot melt powder and can gently shake off the excess hot melt powder) 2.Set the heat press machine temperature to preheat to 110-160 degrees 3.Put the printing sheet face up and spread it into the heat press machine 4.Bake for 40-60 seconds. (remember not to press the hot plate) Step 4: Transfer 1.Take out the bearing material for preheating, remove moisture and wrinkles 2.Then the print sheet is covered in the bearing area for transfer printing 3.Temperature: 110-160 degrees; Time: 8-12 seconds 4.After the T-shirt cools, open the print sheet, the transfer is completed.